DD17.2/DD19.2/DD26.2 Rail Kits 

  • Compatible with DD17.2/DD19.2/DD26.2 frames
  • Front Rail: 6061 aluminum or 17-4PH stainless steel 
  • Rear Rail: 304 stainless steel 
  • Aluminum Front Rails are .40S&W-ready 
  • Front Rail Pin included 

DD17.2/DD19.2/DD26.2 - All Aluminum Rail Kits 

  • Compatible with DD17.2/DD19.2/DD26.2 frames 
  • Front and Rear Rails: 6061 aluminum  
  • Rear rails are 2-piece 
  • Aluminum front rails are .40S&W-ready 
  • Front Rail Pin included 

Plastikov Rail Kits 

  • Compatible with Plastikov v0.9 and later frames 
  • CNC machined 17-4PH (inspected for flatness of 0.005" or better) 
  • Includes screws and one hex key per kit 

DB9/Mac Daddy/SVTR Feed Ramps 

  • Compatible with the DB9/Mac Daddy or SVTR lowers 
  • CNC machined 6061 aluminum 
  • Includes pin 

Hi-Power Rail Kits 

  • Compatible with 3D-printed Hi-Power frames 
  • Two versions available: BHP and FEG 
  • CNC machined from 6061 aluminum 
  • Front and Rear Rail pins included 

G17/G19/G26/SD9/SW9/SR9 Aluminum or Stainless Steel Rail Kits 

  • Compatible with FMDA G17/G19/G26/SD9/SW9/SR9 frames 
  • CNC machined 6061 aluminum or machined and precision ground 17-4PH stainless steel 
  • Includes front rail pins, screws (if applicable), and one hex key (if applicable) per kit 

Riptide Rails' Aluminum Rail Kits and Feed Ramps - General Information

  • Feature prominent chamfers on all edges to aid assembly and reduce interference between components 
  • CNC machined to 0.003” or better bilateral tolerances 

Riptide Rails' 17-4PH Stainless Steel Rail Kits - General Information

  • Rail surfaces and sides are ground on a surface grinder to ensure the highest level of dimensional accuracy, flatness, and parallelism, while providing a very smooth surface that reduces slide to rail friction 
  • Ground chamfers to reduce interference between components 
  • CNC machined to 0.003” or better bilateral tolerances and precision ground to 0.0005” or better bilateral tolerances 
Riptide Rails' DDXX.2 Stainless Steel Rear Rails - General Information
  • Compatible with the DD17.2, DD19.2, and DD26.2 3D-Printed Frames 
  • Manufactured from 304 Stainless Steel 
  • These are laser cut, tumbled, hand-deburred, bent using a series of custom bending diesand bend-kinks are removedFinally, rail width, tab length, and holes are all CNC machined to minimize variance on all dimensions.

Mailing List

Subscribe to our Newsletter