FCG Reinforcement Plates with Anti-Walk Pins
These Fire Control Group (FCG) Reinforcement Plates were designed by DB Firearms and are used to reinforce the trigger pin, hammer pin, and safety selector on builds that use an AR fire control group pattern. Our FCG Reinforcement Plates are manufactured from laser-cut Grade 5 titanium and are deburred, tumbled, and ready to drop in and use. Anti-walk pins are required to hold the plates in place, and it is recommended to use an ambidextrous safety selector, but it is not entirely necessary. Please note that these are laser-cut from sheet metal. While we strive for perfection, there may be occasional minor blemishes on the outer surface due to the manufacturing process.
The included AR Anti-Walk Pins are machined from stainless steel and feature black screws. It is highly recommended that you use Loctite 243 (blue) or equivalent threadlocker on all four screws. Please do not overtighten the screws!
Already have Anti-walk pins? Find the FCG Reinforcement Plates by themselves here: https://riptiderails.com/fcg-reinforcement-plates
- (2) FCG Reinforcement Plate
- (2) AR Anti-Walk Pins
- (4) Anti-Walk Pin Screw